TEST


HP Procurve Switch 8000m J4110A

 

 

HP Procurve Switch 8000m J4110A Managed modular 10/100/Gigabit desktop switches that provide scalable, low-cost switching and all the benefits of HP Proactive Networking. They are ideal for organizations looking for scalable, expandable, low-cost migration to 10/100 switching to the desktop with Gigabit uplinks. The 4000m and 8000m are a simple way to build high-availability networks. The 4000m includes 40 10/100-TX autosensing ports. The 8000m provides 10 open module slots.
 
General Information
Manufacturer Hewlett Packard
Manufacturer Part Number J4110A#ABA
Product Line ProCurve
Product Name ProCurve 8000M Ethernet Switch
Marketing Information - High-speed/ media-flexible uplinks including Gigabit-SX, LX, and 1000Base-T
- Quality of Service through Class of Service (CoS) prioritization features
- Optional redundant power supply
- High performance Gigabit stacking
Manufacturer Website Address www.hp.com
Networking
Device Type Ethernet Switch
Ports Details 1 x DB-9 Console Port(s) Management
Expansion Slots 10 x Expansion Slot(s)
Slots Details 10 x Expansion Slot(s)
Flow Control IEEE 802.3x (Full-duplex)
Media & Performance
Performance
  • 4.7Mpps Throughput for 64-byte Packet(s)
  • 3.8Gbps Backplane Speed
  • Protocols & Management
    Protocols Supported
  • NetBIOS
  • ARP
  • RMON
  • SNMP
  • VINES IP
  • IGMP
  • DEC LAT
  • VINES ECHO
  • CDP
  • SNA
  • TCP/IP
  • IPX/SPX
  • AppleTalk
  • Management - Hp toptools for hubs & switches included
    - SNMPv1/v2c
    - RMON groups: 1 (statistics), 2 (history), 3 (alarm), and 9 (events)
    - Extended RMON
    - RFC 1493 Bridge MIB
    Status LEDs - Collision status
    - Link activity
    - Port status
    - Power
    - Fault LED
    - Self Test LED
    - Switch Engine Fail LED
    - Module Status LED for all 10 slots and for each power slot
    - Fan Status LED
    - 10 Modular slots
    Controls Reset Switch
    Processor & Storage
    Processor 1 x Intel i960JD 66MHz
    Memory
  • 16MB Main Memory
  • 512KB Buffer Memory 10/100Mbps Port(s)
  • 4MB Buffer Memory 1000Mbps Port(s)
  • 2MB Flash Memory
  • Address Table 10K MAC Addresses
    Miscellaneous
    Additional Information - Slot for redundant power supply
    - Power supplies and modules are Hot-swappable
    - 802.1Q -Vlan tagging
    - Port mirroring lets you monitor all ports with a single RMON probe
    - Redundant Fan
    - Port Trunking, 802.1P
    - IP multicast (IGMP) software prevents flooding of multicast video traffic and supports - QoS for IP multicast traffic
    - Programmable ASIC for simple firmware upgrades
    - Switch Meshing
    - Cisco Fast Etherchannel
    - Automatic Gateway Contol
    - Store and Forward switching
    - Latency: < 10 µs (LIFO)
    Bill of Materials - Procurve Switch
    - 8ft console cable (DB9f to DB9F)
    - Power cord
    - Brackets to mount on Wall or in a 19inch Rack
    - Mailer to get HP Top Tools for Hubs & Switches CDROM Installation Guide
    - Management and Configuration Guide
    Certifications & Standards - IEEE 802.1p Priority
    - IEEE 802.1D Spanning Tree
    - IEEE 802.1Q VLANs

    Safety:
    - EN 60950/IEC 950
    - UL 1950
    - CSA 950
    - complies with NOM-019-SCFI-1994

    Emissions:
    - FCC Class A
    - EN 55022/CISPR-22 Class A
    - VCCI Class A

    Immunity:
    - EN 55024/CISPR 24
    - ESD: IEC 61000-4-2; 4kV CD, 8kV AD
    - radiated: IEC 61000-4-3; 3V/m
    - EFT/Burst: IEC 61000-4-4; 1.0kV (power line), 0.5kV (signal line)
    - Surge: IEC 61000-4-5; 1kV/2kV AC, 1kV signal, 0.5kV signal line
    - Conducted: IEC 61000-4-6; 3V
    - Power freq. magnetic field: IEC: 61000-4-8; 1A/m, 50 or 60 Hz
    - Voltage dips or interruptions: IEC 61000-4-11; > 95% reduction: 0.5 periods, 30% - reduction: 25 periods
    - EN 61000-3-2/IEC 61000-3-2; harmonics
    - EN 61000-3-3/IEC 61000-3-3; flicker
    Power Description
    Input Voltage
  • 110 to 127V AC
  • 200 to 240V AC
  • Power Consumption 157W
    Power Supply Redundant Optional
    Environmental Conditions
    Temperature 32 to 131°F (0 to 55°C) Operating
    Humidity 15 to 95% Operating
    Altitude 15090 ft Maximum Operating
    Thermal Dissipation 535 BTU/h
    Physical Characteristics
    Body Color Gray
    Form Factor Rack-mountable
    Dimensions 7" Height x 13.2" Width x 17.4" Depth
    Shipping Dimensions 13.00" Height x 18.5" Width x 22.75" Depth
    Weight 20.7 lb
    Shipping Weight 27.75 lb
    Warranty & Support
    Standard Warranty Lifetime
    Additional Warranty Information - Lifetime Warranty for as long as you own the product